| 配方类型： |
DETERGENTS AND DISINFECTANTS |
| 配方说明： |
Heavy Duty Detergent |
| 配方组成： |
Sodium Silicate RU (46%)/8.9
Use Dilutions:
Medium Duty- 2-4 oz/gal
Heavy Duty- 4-8 oz/gal
pH (as is) = 12.7
Foam = Moderate
Charge water, start agitation and then add N sodium silicate. Then add
NaOH solution and agitate until clear. Finally add "Monaterge" 85 and
continue agitation (approx. 45 min) until solution clears.
FORMULA No.
"Neodol" 25-3S (60% AM)/16.8
K2CO3 1.5H2O/25.0
CMC As Is/0.5
Water/q.s.
"Tinopal" 5BM/0.5
"Tinopal" RBJ 200%/0.025
Polar Brilliant Blue RAWL 110%/0.005-0.05
"Odrene" 22/0.05
Water/q.s.
"Tinopal" RBJ 200%/0.025
/45.0
N Sodium Silicate/40.0
Sodium Hydroxide (50%)/10.0
"Monaterge" 85/5.0
Surface Tension (dynes/cm-2% sol'n @20'C)/30.5
Diethanolamine/10.0
"Tinopal" 5BM/0.5
/40.0
"Neodol" 25-9/25.0
N Sodium Silicate/40.0
Sodium Hydroxide (50%)/10.0
"Monaterge" 85/10.0
"Gantrez" AN-149/N25-9 (99/1)/1.0
Surface Tension (dyn |
| 配制方法： |
To a mixing tank, charge proper amount of water.
Note: In order to predissolve optical brighteners, baking soda and avoid over-dilution, suggest you retain a portion of water.
With agitation, add proper amount of "Accodet" HD. Mix until homogeneous and clear. With agitation, add proper amounts of optical brightener, dye, perfume and 37% formalin. Mix until homogeneous and clear.
Check pH and solids. If necessary, make adjustments.
pH (as is)- 8.0-9.5 Solids- 25-30% pH should be stable over 20 min intervals. Check pH! When approved, buffer system with 0.1% bicarbonate of soda. Do not add buffer until pH is stable and meets specification. the baking soda may be predissolved in a small quantity of water prior to it being added to the production mix. Blend until pH is stable, approximately 20 min.
Remove sample for pH and solids. Shut off agitator and allow air to escape from product. When approved, package. |
|
