| 配方类型： |
COATINGS |
| 配方说明： |
Concrete Seal Latex (18% Solids) |
| 配方组成： |
Mor-Flo 155 (38%)/401.0
Ethylene Glycol/17.0
SWS 211 (10%)/0.5
Water/527.9
Dibutyl Phthalate/13.0
Tributoxyethyl Phosphate/3.6
Butyl Carbitol/26.0
FC-129 (1%)/10.0
Proxel GXL/1.0 |
| 配制方法： |
Charge the mixing vessel with the water of dilution. With good agitation, slowly add the components in the order listed. Continue stirring for one-half hour. Adjust the pH to 7.5-8.5, if necessary, with 28% ammonium hydroxide.
Surface Preparation: The floor surface should be thoroughly cleaned and rinsed. Sufficient care should be taken to remove oily type soils. Acid etching is not recommended.
Application: Two coats are recommended. Allow up to 1 h between coats, depending on solids and drying conditions.
Coverage: Approximately 500 ft^2/gal, and up to 1500 ft^2/gal for the second coat, depending on the conditions of the substrate. |
|
